Owatrol Oil - Paint
Conditioner & Rust Inhibitor
Owatrol added to any oil-based paint, varnishes or stains, beats
paint drag - reducing brush marks and increasing coverage.
Owatrol can be used to combat rust wherever it occurs,
penetrating deeply to stabilise the rust and prevent it reforming.
Because of it's wetting properties it penetrates through the rust to
the sound metal, driving out any moisture and air; filling the rust
pores with oil. It then bonds with the rust to form a flexible
protective coating which may be painted over without further
E-B Emulsa Bond -
Mix in Bonding Primer - Added Bond for Problem Surfaces
Just Scrape Off Loose
Material & You're Ready to Paint
E-B's high solids content maintains the inherent characteristics
of the paint improves hiding power and increases coverage by
up to 20%
Low in odour, it is the ideal solution to all those interior
distemper and whitewash problems, eliminating the need for the
laborious job of washing down. Just scrape the surface to remove
loose material and E-B mixed into the first coat will make the paint
Easy on the hands and odourless, Owatrol ESP is the easy, quick and
effective way to prepare any non-porous surface whether inside or out
and being odourless makes it ideal in confined areas. Just clean the
surface, apply ESP, wait 2 hours then paint.
Corrosive Inhibiting Primer - Rust Problems Solved
Simple and easy to use it may be applied by brush, roller or spray
with minimal surface preparation. CIP stabilises the surface,
penetrating deep into the substrate, driving out excess moisture and
air to form a solid stable layerthat other coatings can adhere to.
CIP maybe used on new or rusted surfaces and is especially
recommended for the protection of cars, civil engineering equipment,
nautical ballast tanks as well as every items such as metal railings